DIN JES Series End Suction Pump

The JES range of pumps complies fully to the international standard DIN 24255. This standard covers both performance and dimensions.

DSE Series Stainless Steel Couple Couple Pump

GMP/KMP Self Priming Pump

• High efficiency, compact design, light weight, save space and easy to install.
  
• Using mechanical seal which no damage to shafe and life extension.
  
• Special construction for the pump casing, high self priming capability.
  
• With half open-type impeller which drainages waste water effectively.
  
• Only initial water-adding is required to save the trouble of continuously water-addings.

HC Series - Cast Iron Medium Range Self Priming Pump

• Two stages design for wide range use.
  
• High head and large capacity.
  
• High efficiency motor.
  
• Close-couple type for saving space.

ISO JES Series - ISO 2858 Standard End Suction Centrifugal Pump

• Aggresive Water Supply
  
• Sea Water Supply or Circulation
  
• Cold or Hot Water Circulation
  
• Clean or Pure Water Supply
  
• Variety of PetroChemicals
  
• Other Special Applications

JCP Series - Stainless Steel Centrifugal Pumps

The pumps are suitable for transporting clean media which are non-aggressive to stainless steel SUS304 or SUS316.

Horizontal Multistage Centrifugal Pumps - JSS/JSSN 2, 4, 8,12 Series

Reliability/Compact form/Wide range high efficiency / Easy maintenance suitable for slightly corrosive liquids.

Horizontal Multistage Centrifugal Pump - JHC 2,4,8,12 Series / JHS 2,4 Series 50Hz

The JHC and JHS series are non-self priming, horizontal multistage centrifugal pumps. Pump is coupled with motor at the same shaft and mounted on a base-plate. The friendly design makes the pump suitable for installation in the small domestic or industrial water supply systems. The pump is fitted with a mechanical seal and through-going-motor shaft.

JIV Series - Stainless Steel Immersible Verical Multistage Pump

• The performance is obtained using 2 pole, 50Hz standard motor at 2900 rpm.
  
• Water test temperature 200C. Performance limits ISO2548 Specification for standard class C pumps & GB3216-2005 specification for standard class 2 pump.
  
• To avoid overload and danger, the pump should be operated within the performance ranges.

JMH Series - Engine Drive Mixed Flow Pump

JPVA Series - Hydraulic Submersible Pump

Type-JPVA Series axial- radial flow pumps are suitable for agricultural irrigation and drainage or industrial water supply and drainage in particular to duty whereby lack access to electricity supply and heavy flood condition where the usage of electricity supply is not warranted. JPVA also used for conveying clean water supply and drainage at remote area.

JSC Series - Horizontal Split Casing Pump

JSC double-suction split-casing pump is our advanced new product. Pump casing is in linearity design with stiffeners. The two bearing are located at a short distance, and the shaft is accordingly shortened, so that shaft bearings and mechanical seals would be kept in a long service life. Shaft is fully sealed away from medium, no erosion and high interchangeability. Close circulate cooling system is applied to its inner seal housing, which maes JSC pump simple in structure any easy to maintain.

JSP Series - Heavy Duty Slef Priming

• The mechanical seal for all models has a 316SS body, Viton O'Rings and Tungsten Carbide Faces.
  
• All cast iron parts are ASTM 48, class 30.
  
• All carbon steel shafts are SAE 4140 HT.
  
• All parts labeled CD4 are hardened 18-8 stainless steel, CD4, DIN 1-4463.
  
• All parts labeled 316SS are CF8M.
  
• Expoxy are ceramic internal coatings are available.

JTD Series - Vertical Single Stage Pump

JTD in-line circulation centrifugal pump is single stage, single suction centrifugal pump. We use an excellently performed hydraulic model when designing. Flow part of pump is manufactured by precision casting technology. The technology makess flow part smooth with little friction and highefficiency.

The advantage of JTD series is energy saving, little noise, reliable performance. The structure is compact. It is easy to assemble and dismantle. It can be connected with pipe work directly. It is used for liquid transfering and circulation and boosting. JTD series pump has an innovatie easy-disassemble structure design, it is no necessary to dismantle the motor when you change the mechanical seal.

JVM-JVMI-JVMN Series - Vertical Multistage Pump

The JVM, JVMI and JVMN pumps are non-self priming vertical multistage pump of in-line design, flange or with Victaulic coupling with equally sized suction and dischange ports. Stage construction with stainless steel impellers, chambers and pressure casing. Pump stub shaft and motor shaft of the IEC-standards motor are directly close coupled. All pumps are equipped with a cartridge type mechanical seal for easy maintenance.

KJ & KJF Series - Chemical Duty Centrifugal Pump

• Special design for shaft seal, use the latest Teflon Bellow seal with inner self-cooling design, without use the circulated cooling pipe.
  
• Excellent capability to self-priming. Extremely powerful self-priming force.
  
• Built with a check valve fully prevents liquid back-flow in pump.
  
• FRPP and PVDF materials provide good corrosion-resistance.
  
• Special design for strengthening construction.

KJL & KJLF Series - Chemical Duty Centrifugal Pump

JSC double-suction split-casing pump is our advanced new product. Pump casing is in linearity design with stiffeners. The two bearing are located at a short distance, and the shaft is accordingly shortened, so that shaft bearings and mechanical seals would be kept in a long service life. Shaft is fully sealed away from medium, no erosion and high interchangeability. Close circulate cooling system is applied to its inner seal housing, which maes JSC pump simple in structure any easy to maintain.

SC Series - Sea Water Open Impeller Centrifugal Pump

SJ Series - Stainless Steel Self Priming Pump

• Aluminum motor housing.
  
• Light weight and superior heat dissipation.
  
• Back pull out construction.
  
• Assure easy maintenance and inspection.

VC Series - Large Volume Cast Iron Centrifugal Pump

• Aluminum motor housing.
  
• Light weight and superior heat dissipation.
  
• Back pull out construction.
  
• Assure easy maintenance and inspection.
  
• Colse-couple design for space saving.

W Series - Cast Iron Centrifugal Pump

• Aluminum motor housing.
  
• Back pull out construction.

WB Series - Stainless Steel Centrifugal Pump

• The pumps are suitable for transporting clean media which are non-aggressive to stainless steel SUS304 or SUS316L/
  
• Water supply systems pressure boiler feeding.
  
• Pure water treating systems.
  
• Pharmaceutical & food stuff.
  
• Refining chemical industries.
  
• Washing and sprinkling.