Due
to comparatively Light Weight, no tedious and
clumsy installation. Ease Maintenance &
Servicing.
Withstand
wide fluctuation in temperature of pH of liquid
medium.
Comparatively
less opening pressure required.
High
ND and Reliable Seating with effective dimensional
stability.
Reducing
the chances of vandalism.
Compliance
with ISO 9002:1994 , BS EN ISO 9002:1994
Penstock
/ Screw Down Gate
True
Bi-directional operation with no "on/off"
seat pressure differential restrictions that
allow for positive shut-off in either direction.
Compression
sealing for drip-tight shut off using polyurethane
or synthetic rubber seals.
Compression
sealing eliminates grit and fines seat wear
common in metal seated cast iron penstocks.
Low
friction operation using UHMWPE (Utra-High Molecular
Weight Polyethylene) guides to take up lateral
loads.
Light
weight, simple installation.
Unlimited
custom bulit options for unequal width &
height requirements, including materials composition.
Standard
flush bottom design eliminates debris build-up.
Reduced
operating torque.
Design
head up to 20m.
Swimming
Pool and Spa Equipement Durax-Max
All
components of WL-SCPB Series Self-Priming Centrifugal
Pumps are designed for maximum performance and
economy in a swimming filtration system.
These
pumps are suitable for swimming pools and spa
pools with hair strainer complete to body.
Filtration
Slot Well Screen - Water Strainer
The
water filtration well screen is a kind of filtered
water tubing with the perforation .It is manufactured
by a V or wedge shaped wire around an internal array
of longitudinal support rods. Each intersecting
point of these wires is fusion welded. The v or
wedge shaped wraps around the support rods over
full length of the screen, creating a continuous
slot opening. Hence, the screen allows water to
enter to well freely in ample flow rate. While at
the same time filter out the majority of the sand
and gravel.
Simavis Engineering Sdn Bhd - Submersible Pump, Water Treatment Plants & Wastewater Treatment Systems
For
any inquiries or questions regarding the above product
& services, please contact us in the folllowing
ways:
contact us: +603
8081 9685 or email us: simon@jmisimavis.com